The difference between a thin cylinder with the same bore and stroke and a standard cylinder
1. Thin cylinder or compact/short stroke cylinder refers to the adoption of certain size reduction designs compared to standard (such as IS06432) cylinders. . This allows the cylinder to be shorter than a standard cylinder under a certain stroke. The thin cylinder takes up less space, has a lightweight structure, beautiful appearance, and can withstand large lateral loads. It can be directly installed on various fixtures and special equipment without installing accessories. Thin cylinder< The function of /span> is to convert the pressure energy of compressed air into mechanical energy, and drive the mechanism to perform linear reciprocating motion, swing and rotation motion. The structure of the thin cylinder: consists of cylinder barrel, end cover, piston, piston rod and seals.
2. The definition of standard cylinder is not obvious. Sometimes it is another name for a thin cylinder, and sometimes it refers to a cylinder made of lightweight materials. Used in all walks of life, cylinders specially used for dust removal equipment are generally used with poppet valves and electromagnetic pulse valves. The company customizes cylinders with different bores and strokes, cylinder flanges, and single-lug and double-lug matching cylinders according to the specific requirements and needs of customers. As well as cylinder standard air rods and cylinder extended air rods, etc. 
The compressed air enters the air source treatment component. After water separation, filtration, pressure reduction, and lubricating oil treatment, dry, clean, and lubricated air with a certain pressure enters through the solenoid valve. cylinder. The solenoid valve receives the signal from the electric control cabinet and controls the action of the cylinder to realize automated processes such as cold air, ash unloading, offline ash cleaning, and back-blowing air conversion.
Standard cylinders can be divided into: 63, 80, 100, and 125 specifications. The normal working conditions of the cylinder: medium and ambient temperature are -5~70℃, working pressure is 0.1~1Mpa.CylinderThe movement speed range is 50~500mm/S. Solenoid valve K25JD to 25 series two-position five-way cut-off reversing The valve can be divided into five-port two-position/five-port three-position series specifications. The solenoid valve with appropriate diameter, voltage, connecting thread, and installation form must be selected according to the project requirements. It can also be selected according to the actual use.
