Features of SDA ultra-thin standard cylinder
1. Implement corporate standards
2. The cylinder block, back cover, piston and piston rod adopt a riveted structure, which is compact and reliable;
3. The inner diameter of the cylinder is rolled and then hard oxidized to ensure good wear resistance and durability;
4. The piston seal adopts a special-shaped two-way sealing structure, which is compact in size and has oil storage function;
5. Compact structure can effectively save the installation of air conditioners;
6. There is a magnetic switch slot around the cylinder, making it easy to install the sensor switch;
7. Various specifications of cylinder types are available;
SDA ultra-thin standard cylinder technical parameters
1. Inner diameter (mm): 12 16 20 25 32 40 50 63 80 100;
2. Action mode: double-action type, single-action extrusion type, single-action introduction type;
3. Working medium: air;
4. Operating pressure range: double-action type 0.1~1.0MPa (14~145Psi), single-action type 0.2~1.0MPa (28~145Psi);
5. Guaranteed pressure resistance of 1.5MPa (215Psi);
6. Working temperature ℃: -20~80;
7. Use speed range mm/s, double-action type: 30~500;single-action type: 50~500;
8. Stroke tolerance range: +1.0 0;
9. Buffer type: anti-collision pad;
10. Pipe diameter: M5*0. 8 PT1/8 PT1/4 PT3/8;
11. Symbol:.
The meaning of model specifications of SDA ultra-thin standard cylinder:
Stroke table of SDA ultra-thin standard cylinder:
Inner diameter (mm)
Standard stroke (mm)
Maximum stroke
Allowed travel
12
16
resume action
Attached magnet
5 10 15 20 25 30 35 40 45 50 55
65
70
Not magnetic
5 10 15 20 25 30 35 40 45 50 55 60 65
65
80
single action
5 10 15 20 25 30
