What is the difference between a two-axis cylinder and a three-axis cylinder
A biaxial cylinder is composed of two piston rods and a piston, which is called a biaxial cylinder.
The three-axis cylinder has two guide shafts, plus the piston rod, it is called a three-axis cylinder.
1. Different components
Double-axis cylinder, also known as dual-cylinder, is two guide rods, and the guide part of the cylinder is a shorter copper sleeve.
Three-axis cylinder guide rods are divided into copper rings and ball linear bearings. Ball bearings have high precision, but are expensive.
2. Different types of piston rods
Double-axis cylinderHas two identical piston rods.
A three-axis cylinder has two different piston cylinders.
3. The power effect is different
Twin-axis cylinders have small power and slow action.
The three-axis cylinder has high power and fast action.
The advantages and disadvantages of two-axis cylinders and three-axis cylinders
Double-axis cylinder adopts Airtac enterprise standard embedded body installation and fixation form, saving installation space;it has certain anti-bending and anti-torsion properties, and can withstand certain lateral loads;there are mounting holes on three sides of the fixed plate to facilitate multi-position loading;the anti-collision pad at the front of the body can adjust the cylinder stroke and alleviate impact;this series of cylinders The standard configuration is magnetic type, and non-magnetic type is optional.
Three-axis guide rod cylinder wholesale, two guide rods made of special bearing steel, guided by linear bearings or bronze bearings, have high torsion resistance and lateral load resistance;The drive unit and guide unit are designed in the same body, no additional accessories are required, small space is required, and the air inlet interface is optional, making installation more convenient;there are two accurate positioning positions on the bottom surface of the body, the rear end surface of the body and the fixing plate. holes, providing higher precision positioning and installation where higher precision is required;Three-axis cylinderThe four magnetic induction switch grooves on the main body provide a variety of installation methods for the induction switch;the special design of the main body provides multi-directional installation and fixing types.
