Definition of corner cylinder:
The angle of the cylinder can be rotated. The general rotation range is between 0-90°. Its stroke is composed of two parts: the rotation stroke and the clamping stroke. When used, the cylinder The tightening action must occur during the clamping stroke.
Main models of corner cylinders:
ACK corner cylinder, ACKL corner cylinder, ACKR corner cylinder, MKB corner cylinder.
How to distinguish between angle cylinder and rotating cylinder
When selecting a model, many customers cannot tell the difference between a corner cylinder and a rotary cylinder?
The rotary cylinder realizes plane rotary motion and cannot realize the up and down motion of the output shaft.
AndAngle cylinder can realize the up and down movement of the output shaft. Its working principle is to use air pressure to drive the piston to rotate, and then complete the clamping stroke after rotating to a certain angle - that is, straight down pressure movement.
Advantages of corner cylinders:
1. Imported dustproof: The surface of the piston shaft seal has high wear resistance and no air leakage when pulled sideways.
2. Spindle double-slot design: overfrequency quenching treatment, high stability and higher hardness.
3. Cylinder anodizing treatment: A hard protective layer is produced on the surface, which is anti-oxidation and corrosion-resistant, extending the service life of the product.
The above isThe angle cylinder and The difference between rotating cylindersContent introduction, want to know moreCylinderFor related information, please log in to Sunway Pneumaticwww.diancifa.cc Check.
