Brass electromagnetic What are valves used for
Brass solenoid valve is suitable for air, oil, water and other non-corrosive fluids. There are no requirements on the flow direction of the fluid during operation, no requirements on the inlet and outlet pressure of the fluid, and no strict requirements on the cleanliness of the medium. It can be widely used in electric power, petroleum, chemical industry, metallurgy and other departments to remotely control the flow of the medium in the pipeline. Circulation and disruption.
Working principle of brass solenoid valve
The brass solenoid valve is a two-position two-way automatic To maintain an automatic valve, its opening (closing) valve is jointly controlled by the internal and external circuits. When the opening (closing) valve signal is turned on, the coil is excited, generating a rotational torque, driving the ball valve spool to rotate, and the spool turns to fully open (closed). ) position, the internal mechanism of the valve automatically cuts off power and the valve remains in the open (closed) position. This valve adopts spherical sealing, which is sealing better than traditional line sealing It has better performance and longer service life;its coil is instantly charged, saving electric energy and extending its service life.
Characteristics of brass solenoid valve
1. This valve adopts ball valve structure to enhance sealing performance and extend service life.
2. The coil is instantly charged to avoid traditional solenoid valves Because it is easy to burn the coil when it is charged for a long time, it cannot work.
3. There is no requirement for the media flow direction, Solenoid valve The two chambers serve as the inlet and outlet of each other.
4. Because of its straight-through structure, the media is clean No degree required.
5. No requirements for import and export working pressure , it can work normally within the pressure range of 0~2.5MPa.
6. During work, internal and external circuits are required The joint action can convert the closed and closed states of the valve, so even if the external switch signal malfunctions, as long as the internal circuit is normal, it will not cause the valve to malfunction.
7. This valve is entirely made of stainless materials. Ensure good operation.
The above isWhat are the uses of brass solenoid valves and the working principle of brass solenoid valves Content introduction, think For more information, please log in to www.diancifa.cc.
