1. Implement JIS standards;2. Two guide rods made of special bearing steel, guided by linear bearings or bronze bearings, have high resistance to torsion and lateral load;★Note: Steel ball linear bearings: suitable for cylinder push and lift movements, or where high precision is required Platforms with high load-bearing capacity are specially used for occasions requiring low friction movement: Bronze sliding bearings: suitable for occasions such as cylinder braking and radial load resistance, which are more than 2 times higher than ordinary brake cylinders. Resistant to lateral impact forces and has greater torsional stiffness. 3. The drive unit and guide unit are designed in the same body, requiring no additional accessories and minimal space requirements. The air inlet interface is optional, making installation more convenient;4. There are two precise positioning holes on the bottom surface of the body, the rear end surface of the body and the fixing plate (see the PA hole and the XX hole in the outline diagram). For occasions where higher precision is required, higher precision positioning installation is provided;5. The four magnetic induction switch grooves on the body provide multiple installation methods for the induction switch;6. The special design of the body provides various installation and fixing types: Category: Three-axis cylinder with guide rod, Brand: Airtac, Series: TCM