Definition of Yadeke solenoid valve
Yadeke solenoid valve is the basis of automation for controlling fluids The component belongs to the actuator;it is not limited to hydraulic and pneumatic. Solenoid valves are used to control the direction of hydraulic flow. Factory mechanical devices are generally controlled by hydraulic steel, so solenoid valves are used.
Working principle: There is a closed cavity in the solenoid valve, with through holes at different positions. Each hole leads to a different oil pipe. There is a valve in the middle of the cavity, and two electromagnets on both sides. When the magnet coil on the surface is energized, the valve body will be attracted to which side, and the movement of the valve body is controlled to block or leak different oil drain holes. The oil inlet hole is normally open, and the hydraulic oil will enter the different drain holes. The oil pipe then pushes the oil-rigged piston through the pressure of the oil. The piston drives the piston rod, and the piston rod drives the mechanical device. In this way, the mechanical movement is controlled by controlling the current of the electromagnet.
