What is a pneumatic triple piece? The differences between air source triple pieces, two-piece pieces and triple pieces are introduced as follows:


In pneumatic technology, the three air source processing components of air filter, pressure reducing valve and lubricator are assembled together and are called pneumatic triple parts. They are used to purify, filter and depressurize the air source entering the pneumatic instrument. The instrument supplies rated air source pressure, which is equivalent to the function of a power transformer in the circuit. The pressure reducing valve can stabilize the pressure of the air source and keep the air source in a constant state, which can reduce damage to hardware such as valves or actuators due to sudden changes in the air source pressure. The filter is used to clean the air source and can filter the moisture in the compressed air to prevent moisture from entering the device with the gas. The lubricator can lubricate the moving parts of the machine body and lubricate the parts that are inconvenient to add lubricating oil, greatly extending the service life of the machine body. Please pay attention to cleaning the connecting pipes and joints during installation to prevent dirt from being introduced into the air path. When installing, please pay attention to whether the direction of gas flow is consistent with the direction pointed by the arrow on the body, and whether the tooth type of the pipe and joint is correct. Fix the filter, pressure regulating valve (pressure regulating filter) and oil feeder;match the convex groove of the fixing bracket with the groove on the body, and then lock it with the fixing piece and screws. To fix the pressure regulating valve and pressure regulating filter when used alone;just rotate the fixing ring to lock the attached special fixing piece.